NEXCOM NEX 604 - Manual (Page 53)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 38 NEX 604 User Manual
Chapter 3: BIOS Setup
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables Legacy USB support.
AUTO option disables legacy
Support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications. USB Configuration
USB Devices:
None
Legacy USB Support
EHCI Hand-off
[Enabeld]
[Disabled]
Legacy USB Support
Enable Enables Legacy USB.
Auto
Disables support for Legacy when no USB devices are connected.
Disable Keeps USB devices available only for EFI applications.
EHCI Hand-Off
This is a workaround for OSs that does not support EHCI hand-off. The EHCI
ownership change should be claimed by the EHCI driver.
USB Configuration
This section is used to configure the USB.
Super IO Configuration
This section is used to configure the serial ports.
Super IO Chip
Displays the Super I/O chip used on the board.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Parameters of Serial Port
O (COMA) Super IO Configuration
Super IO Chip
 Serial Port 0 Configuration
 Serial Port 1 Configuration
 Serial Port 2 Configuration
 Serial Port 2 Configuration
 Parallel Port Configuration
IT8783F