NEXCOM NEX 604 - Manual (Page 52)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 37 NEX 604 User Manual
Chapter 3: BIOS Setup
SATA Controller(s)
Enables or disables SATA ports 0-3.
Configure SATA As
IDE
This option configures the Serial ATA drives as Parallel ATA physical
storage device.
RAID This option allows you to create RAID or Intel Matrix Storage
configuration on Serial ATA devices.
AHCI This option configures the Serial ATA drives to use AHCI (Advanced
Host Controller Interface). AHCI allows the storage driver to enable the
advanced Serial ATA features which will increase storage performance.
iFFS Support
Enables or disables iFFS.
Intel ® Fast Flash Standy
This section is used to configure Intel ® Fast Flash Standy.
IDE Configuration
This section is used to configure the SATA drives.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Ports (0-3) Device Names
if Present and Enabled. SATA Port0
SATA Port1
SATA Controller(s)
Configure SATA as
Not Present
Not Present
[Enabled]
[AHCI]
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable iFFS. iFFS Support [Disabled]