Errors, Switching protocol – NeoPro Borrego+ 8x8 User Manual
Page 19
19
DOC42-00027-B Integrator's Guide.doc
Errors
Any command with invalid parameters or a syntax error will result in a response
of:
[E]
Switching Protocol
Note: Some NeoPro matrix switch models do not have all these features and
will display the error [E] response when such a command is received. Refer to
the Model Specific Features section for details.
Switching commands use this structure
[mc,i,o,t]
m
is the first letter of the model name (refer to Model Specific Features section)
c
is the Command Type or Mode
i
depends on the Command Type:
For switching
i
is the Input number. Input 0 will disable the selected
output zone. For
L
,
B
, and
T
(Volume, Bass, Treble commands)
i
is a
value from 0-99.
o
is the Output number (0 to maximum number of outputs). Output
0
sends the
selected input to all output zones (Party Mode).
t
is time in seconds
Optional for delays and fades, ignored in
B
&
T
Commands.
Command Types or Modes
X
switches All A/V Signals
V
switches High Definition Video (YPbPr)
D
switches Digital Audio (SPDIF)
A
switches Analog Audio (L/R stereo)
C
switches Composite Video
L
sets the Volume Level
B
sets the Bass Level (
i
values from 0 to 99). Flat response = 50.
Greater values for boost and less than 50 to attenuate.
T
sets the Treble Level (
i
values from 0 to 99). Flat response = 50.
Greater values for boost and less than 50 to attenuate.