Front panel text display, Switching using ir – NeoPro Vandenberg User Manual
Page 9
DOC42-00041-A_Vandenberg_Integrators_Guide.doc
9
Front Panel Text Display
Vandenberg
192.168.1.100
The product name and IP address will be displayed on the front text display as
shown above.
Switching Using IR
When powered on, the IN button will start a switching command. The text on
the display will guide you through the correct buttons, and should look like this:
IN
As you enter keys on the remote, they will show up on the front display for
confirmation.
The basic routing sequence is shown below, where XX represents the two digit
input number and YY represents the two digit output number.
Routing Function
Key Sequence
Switch video and audio from input x to output y
IN, X, X, OUT, Y, Y
Switch input X X to all outputs
IN, X, X, OUT, 0, 0
Disable output Y Y
IN, 0, 0, OUT, Y, Y