Knox Video KEYPAD16 - Manual (Page 8)

KNOX VIDEO
K
EYPAD
16
AND
K
EYPAD
20 R
EMOTE
C
ONTROLLERS
KNOX VIDEO
K
EYPAD
16
AND
K
EYPAD
20 R
EMOTE
C
ONTROLLERS
Page 12 Page 11
3.8 SUMMARY OF STORE-KEY FUNCTIONS
Command Function Argument
STORE80 Store local pattern 01-20
STORE81 Recall local pattern 01-20
STORE82 Output number for
single station mode
01-64
STORE83 Set Mode 1=Full Function
2=Single Station
3=Strings
4=Recall
STORE84 --
STORE85 --
STORE86 --
STORE87 --
STORE88 --
STORE89 --
STORE90 Timed mode on
STORE91 Timed mode off
STORE92 Timed mode time 1-999
STORE93 Select router 1=4x4
2=8x8
3=16x16
4=Chameleon64
5=ChameleonHB and
Chameleon256
STORE94 Clear patterns No=0 Yes=1
STORE95 Salvo Mode on/off
STORE96 Display current pattern Enter to continue
STORE97 Interrogates for cards Cham64 only
STORE98 Lock/unlock output 01-64
STORE99 Queue mode on/off
Additional keys on 20-key model:
1: Mode 1=Full Function
Mode 2=Single Station
Mode 3=Strings
Mode 4=Recall Patterns
2: Salvo Mode on/off
3: Display current pattern Enter to continue
4: Queue Mode on/off
3.9 OPERATING FROM AN UPSTREAM TERMINAL
Generally, commands from an upstream controller or terminal device are
passed on through the Keypad Controller to the router to be acted upon, and
generally, all responses from the routing switcher to the controller will be echoed
upstream to the terminal device.
However, all commands preceded by a $ are blocked. The STORE-key
functions listed on the previous page can be activated from a terminal by adding
the $ in front of the command. The command arguments must be a part of the string
from the terminal (e.g., $S8012 stores the current pattern into local pattern 12).