KLING & FREITAG K&F GRAVIS 15 XW - Manual (Page 16)

User's manual K&F GRAVIS 15
KLING & FREITAG GMBH © 2015 Version 2.4 Page 16 of 29
7. Arrayed Speaker (Cluster)
If the loudspeaker are operated through K&F system controller, we recommend to use the
'Top Low Cut' switch for this operation. So you can optimize the frequency response for this
application.
When operating the systems without any K&F system controller, you should decrease the
frequencies below 300 Hz for 3-4 dB.
7.1 Horn not rotated
not rotated horn
standing speakers
Winkel 2
W
in
k
e
l
3
Winkel 1
A smaller angle
3 results in a
smaller vertical
coverage angle
but increases the
sound power
level.
Combination Angle 1 Angle 2 Angle 3
Gravis 15 N with
Gravis 15 N 30° 40°
Gravis 15 N with
Gravis 15 W 35° 45°
Gravis 15 N with
Gravis 15 XW 40° 50°
Gravis 15 W with
Gravis 15 W 45° 55°
Gravis 15 W with
Gravis 15 XW 50° 60°
Gravis 15 XW with
Gravis 15 XW 55° 65°
20° - 30°
Application Increasing the
horizontal
coverage angle,
e.g. for wide
audience areas Increasing the
horizontal
coverage angle
and sound
pressure level for
larger distances Increasing the
vertical angle,
e.g. for covering
balconies