Rotating the high frequency horn – KLING & FREITAG K&F GRAVIS 15 XW User Manual
Page 13

User's manual
K&F GRAVIS 15
KLING & FREITAG GMBH © 2015
Version 2.4
Page 13 of 29
5.
Rotating the high frequency horn
When operating upright, the GRAVIS 15 N has a practice-orientated coverage characteristic of
65° x 50° (hor. x vert.), the GRAVIS 15 W has 90° x 50° (hor. x vert.). When you use it as a stage
monitor, you have a good coverage into the depth of the stage and an optimal lateral sound
field boundary on the stage. For special uses, the horn can also be rotated.
If you wish to rotate the horn, proceed as follows:
1.
Remove the grille screws with a 2.5 mm Allen key and remove the front grille.
2.
Remove the horn screws with a 3 mm Allen key.
3.
Turn the horn by 90°.
4.
Screw on the horn tightly again.
5.
Mount the front grille with the 6 grille screws.