Junger Audio C8651 - Dolby® Metadata - Manual (Page 7)

digital audio
modular
processing system
C8000
Dolby Medatada serial RS485 I/O
C8651
page 7/7
SETUP
Metadata Inserter
From C8000 Bus
here you must select an audio bus where you want to insert the
external serial metadata. It may be a 2Ch or 8Ch multiplex bus.
Metadata Inserter the metadata inserter will insert the decoded serial metadata from the
9-pin input into the USER bits of the respective audio signal.
To C8000 Bus here you must select an other bus that will carry the metadata after
inserting
Enable Bus Driver one can enable / disable the Bus Driver to set up the module without
interference with other modules already installed.
Metadata Extractor
From C8000 Bus
here you must select an audio bus that carries Dolby metadata. If such
bus is in 8Ch multiplex mode you may select one of four pairs that has
Dolby metadata attached to it.