Junger Audio C8405 - SDI (3G/HD/SD) - Manual (Page 3)

digital audio
modular
processing system
C8000
3G/HD/SD SDI 16ch embedder/de-embedder
with video delay and VANC Dolby Metadata
C8405
Jünger Audio-Studiotechnik GmbH
Justus-von-Liebig-Strasse 7
D -12489 Berlin
Germany phone: +49-30-677721-0
fax:
+49-30-677721-46
[email protected]
www.junger-audio.com
3/15
location of switches:
initial set up / bus assignment
For the initial setup the CAN address selection is the most important setting. To avoid address conflict
with other C8k modules the CAN address setting must be done with care.
See C8k System manual for details.
The MASTER MODE is important if the C8405 must deliver the audio clock for signal distribution within
the C8k frame.
The BUS-EN switch controls the driver circuits when power is turned on. This allows you to insert a new
module into an existing system without the risk of disturbing signals on other busses if the drivers are
disabled when the module is inserted into a frame with unknown bus configuration.