ILUMINARC Ilumicode™ Addresser - Manual (Page 7)

Product Description
Ilumicode V 2.21 User Manual Rev. 3 3
2. Product Description
The Ilumicode V 2.21 is the configuration module for ILUMINARC® products that do not
have a control panel. This product is the only way of changing their DMX address and
personality from their default values. The Ilumicode V 2.21 can also be used to configure and
control its associated products in the absence of a DMX controller.
The Ilumicode V 2.21 consists of a single hand-held instrument with a pig tale cable
terminated on a 3-pin XLR connector. It comes with a short adapter cable to connect the
Ilumicode V 2.21 to the signal wires using color-coded alligator clips.
Features
· External control panel for ILUMINARC® IP rated products
· Configures products to operate on 1, 2, 3, 4, 5, 6 or 7-channel DMX modes
· Operating modes:
1-channel: SOLID
2-channel: VW
3-channel: VW + D
3-channel: ARC1
4-channel: ARC1 + D
4-channel: ARC2
5-channel: ARC2 + D
5-channel: ARC3
6-channel: ARC3 + D
7-channel: ARC FULL
Additional Features
SPECIAL1: Refer to lighting product’s user manual
SPECIAL2: Refer to lighting product’s user manual