ILUMINARC Colorist™ Line 12Qa - Manual (Page 13)

Installation
Colorist™ Line 12Qa User Manual Rev. 2 9
If you have not
configured the
DMX starting
address and
DMX personality for each
product, they will all use
their default values. This
means that all products
will operate in unison.
DMX Personality
The Colorist™ Line 12Qa uses the standard DMX data connection for its 5 DMX personalities
as per the table below. Refer to the
Introduction chapter for a brief description of these
personalities. Refer to the Operation chapter to learn how to configure the Colorist™ Line
12Qa to work in these personalities. The DMX Values section provides detailed information
regarding the DMX personalities.
DMX Personality DMX Address DMX Personality DMX Address
4-CH 509 48CH 465
6-CH 507 53CH 460
10CH 503
DMX Controller
The Colorist™ Line 12Qa can work with a standard DMX controller. The channel assignments
will depend on the chosen DMX personality (see the corresponding
Menu Map section) and
the DMX address assigned to each product (see the Programming section).
The figure below illustrates how to connect the DMX controller to the Colorist™ Line 12Qa.