Holland Electronics CT-FBR - Manual

Coaxial C
able Siz
e
To
ols of the
Tr
ade
CUT CABLE - Cut your Coaxial Cable
to desired length at a 90º angle
1
REMOVE LOSE PARTS - Remove
any lose material after stripping
the Coaxial Cable
3
FOLD BACK BRAID - Carefully
fold the braid over the Coaxial
Cable jacket.
4
2
Look for a directional arrow
so you can be sure to insert
your Coaxial Cable properly
Note:
Be sure braid is not
touching the center
conductor
Do not cut off the braid
How to Terminate a Compression Connector
In this lesson, we will teach you how to install a Compression F Connector.
Other Compression Connectors are described below and other configurations
vary slightly between manufacturers, but for the most part are very much the
same in termination technique.
Questions? Call us: 1-800-628-4511 / Visit Us Online: www.HollandElectronics.com
STRIP CABLE - Strip your Coaxial Cable with the
proper Coaxal Cable Strip Tool
The amount of turns will vary
depending on the make and
kind of cable you are using.
F-Connector
3/8” nut, 32 thread
screw-on connector
Coaxial
Cable
Strippers
Compression
Connector
Tool
RG-59
RG-6
BNC-Connector
quick connect / disconnect
¼ turn locking connector
RCA-Connector
push-on connector
reliant on a female RCA jack
Necessary Materials
Connec
tor
Typ
es
Note: Make sure your Coaxial
Cable matches up to your
Compression Connector by
cable size. If you do not match
the sizes up, you will not have
a proper fit.
Coaxial
Cable
Cutters