Future Automation PD - Manual (Page 10)

In
st
al
la
ti
o
n
:
S
ta
ge
5
Page 9 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PD1 & 2 - Projector Drop Mechanism
Hexagon Key
Important - When adjusting the
drop of the mechanism make
sure the sliders in the top of the
main box do not reach the stops
at the end of the slider channel.
Stops
To change the distance the projector will
drop from the ceiling you need to turn the
hexagon key marked 2 with a red dot.
-Anti-clockwise
-Lower Position
-Clockwise -Raise Position
Adjustments Details
Altering Drop Distance
Locate the side pin
into the different
holes for alternative
angle settings.
Cable management
holes on both sides
of the unit.
PD’s are sent out pre-set
to the max drop