Directed Electronics 411R Series - Manual (Page 8)

5
© 2000 Directed Electronics, Inc.
Transmitter Functions
This system is programmable, making it possible to assign any trans-
mitter button to any specific receiver function. The remote initially
comes programmed with Standard Configuration, but may also be
customized by an authorized dealer. The buttons in all of the instruc-
tions in this manual correspond to a Standard Configuration remote.
Button
Locking and Panic Mode activation are controlled by this button.
Pressing it for one second will lock the doors, while pressing it for
1.5 seconds will activate Panic Mode.
Button
Unlocking, Panic Mode deactivation and an optional auxiliary
function are controlled by this button. Pressing it for one second
will unlock the doors. This button is also used to stop Panic Mode
at any time. Additionally, an optional auxiliary function can be
controlled by pressing and holding it for 1.5 seconds. This auxil-
iary output controls ____________________________.
Buttons and
An optional auxiliary function that you have added to your system
can be activated by pressing these buttons simultaneously.
This auxiliary output controls_____________________________.
NOTE: If using an optional four-button remote, the Standard
Configuration may be assigned to buttons III and IV of the transmitter.
Standard Configuration