Future Automation ET - Manual (Page 6)

In
st
al
la
ti
o
n
:
S
ta
ge
2
Page 5 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
ET / ET60 - Electric Tilt Mechanism
Remember to account for any horizontal
off set on the screen mounting holes.
Decide on the mechanism position
Before the mechanism can be fitted, it is important to decide on it’s exact position relative to
the screen. Place the screen face down on the floor and lay the mechanism on the back.
Measure from the top of the screen to a fixing hole so you can work out the positioning on
the wall.
Make sure that the screen is within 140mm from the bottom of the mechanism so it doesn't
foul on the wall when in the out position. For further details and dimensions please refer to
the technical sheets.
140mm MAX
Mount offset