Future Automation UBL - Manual (Page 11)

In
st
all
at
io
n
: S
ta
ge
6
EBF - End Bed Flap
Page 10 of 12 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
Adjusting the flap
Use the Flap Corner Adjusters on each side
to push and pull the flap corners to level the
flap with the footboard.
Recommended clearance should be min
3mm [0.1”]
Flap Corner Adjusters
NOTE - These are the only
adjustments available. The
IN / OUT switch positions are
fixed.
Use a ball driver or a allen key to turn the
adjustment bolts as shown to the right.