Doremi ShowVault / IMB - Manual (Page 6)

IMB.DP.003389.DRM
Page 6 of 16 Version 1.2
Doremi Labs
4 Device Manager Configuration
To configure the ShowVault to operate in a Dual IMB setup, the following steps must be performed.
Figure 2: Device Manager

From the ShowVault GUI, access the Device Manager by going to Menu → Doremi Apps. →
Device Manager (Figure 2).

In the Device Manager, add the Primary Projector (SM) by clicking the Add button (Figure 3).

Set the Primary Projector (SM) Configuration:
o Set the Identifier: SM + name of the projector.
o Select the Projector Model from the drop-down.
o Specify the Head IP of the projector.
o Select Yes for Primary projector.
o Select Yes for Dual IMB.
o For 2D presentations, select Full from the Display drop-down.
 Note: For HFR 3D setups, select Left from the Display mode drop-down (Figure
4).
o Click Save and type the appropriate password (Figure 3).
Device
Manager