Doremi Dimension3D - Manual (Page 17)

3.3 Input Menu
• The following menu can be used to set up the input parameters.
Sub-Menu Value Description
Interface Auto
SDI
HDMI/DVI
Pattern 720p
Pattern 1080p
Input interface setting.
Auto will detect the presence of
either a HD-SDI or HDMI and
signal set the input
automatically.
Selecting any of the two patterns
generates a 3D pattern with 8
channels of audio at different
frequencies. When in pattern
mode, 3D mode, frame rate and
interlaced mode can be set from
the output menu.
SDI 3D Mode Off
Side by side
Top Bottom
Line by Line
Dual Stream SDI input 3D mode setting.
SDI Color * Auto (Detected using
metadata. Not all
manufacturers support it)
RGB
RGB ext
YCbCr 709
YCbCr 709 ext
XYZ’
YCxCz' SDI input color setting.
Auto: Single Link (1.5Gbps)
inputs will be treated as 709
(HD). Dual link (1.5Gbps) inputs
will be treated as RGB. Dual
Stream will be treated as 709.
Ext: designates extended color
range (full bandwidth) as
opposed to limiting the color
spectrum to comply with ITU
standards.
HDMI 3D Mode Off
Checkerboard
Side by Side
Top Bottom
Line By Line
Frame Packing HDMI input 3D mode setting.
Frame packing is as defined in
the HDMI for 1080p at 23.98 / 24
/ 25 / 29.97 / 30 FPS or 720p at
50, / 59.94 / 60 FPS.
DM3.OM.001026.DRM Page 17 Version 1.6
Doremi Labs