Doremi DCP-2000 User Manual
Page 6
•
Put the new battery with the plus sign upwards. Insert first the side that is opposite to the tab
side. Then push the battery on the tab side, until you hear a click, which indicates that the
battery is latched by the tab. See Figure 3.
•
Note
: Always use the same battery type as indicated by the manufacturer, which is CR2032.
Figure 3: Battery Removal
•
Place the DPT back and secure it using the two plastic rivets and the original screws.
•
Close the unit lid using all of the screws that were removed at an earlier step.
•
Connect all cables to the unit and turn unit on.
•
While booting, press key repeatedly to go into BIOS.
•
Set the Date and Time using the current GMT date and time.
◦
Note
: The Doremi default configured servers have the BIOS configuration with correct Boot
Order set, so no other BIOS configuration is needed.
•
Press F10 to save the new BIOS configuration and exit BIOS configuration.
The unit will start booting and is now ready to work again in the system. You have now completed this
procedure.
D2K.DP.002521.DRM
Page 6
Version 1.1
Doremi Cinema LLC
Positive
Side Up
Insert side
near tab last
Battery
Tab