DekTec DTC-382 TmmXpress - Manual (Page 10)

© 2013 - 2014 DekTec Digital Video BV Page 10/12 DTC-382 TmmXpress Manual
Essential Tools for Digital-TV Professionals April 2014
DTC-382 TmmXpress
7.5.2. RF Output settings
In case the output type RF is selected this area allows the selection of the ISDB-Tmm/T
SB
/T capable
modulator card and the RF parameters.
ISDB-Tmm/T
SB
/T RF output settings
- Level
Level (in dBm) of the output signal.
7.6. TS and Layer Parameters
The ISDB-T parameter tab allows you to specify the transport stream, number of segments and
modulation parameters for each block of 13- 3- or 1-segments.
7.6.1. TS ISDB-T Parameters
Each light coloured row specifies the transport stream source and the common ISDB-T parameters of
a block of segments.
TS parameter Description
TS Displays the TS number
Broadcast type Broadcast type: Television (13-segments), 1-segments-radio or 3-segments
radio
IIP-PID PID of the IIP
Tune info Displays the centre frequency of this block of segments
Partial Partial reception: on or off
Emergency Emergency: on or off
Source Displays the selected source. When double clicking on the source, a dialog is
opened that allows you to select the source. If the selected transport stream
file has valid TMCC information, the modulation parameters and layer
mapping can be used by checking the “Use TMCC info” checkbox;
otherwise the layer-mapping has to be specified manually. If the TMCC
information is used, the layer parameters are fixed and cannot be changed.
To add more TS-es, right-click the mouse in the ISDB-T parameter area and select: Insert TS.
Alternatively, the Insert key can be used.
To remove a TS, select the TS then right-click the mouse and select: Remove TS. The shortcut key in
this case is Delete.