Datapath Vision800 User Manual
Page 11
Chipset>North Bridge Configuration>Initiate Graphic Adapter - [PEG/PCI]
Chipset>North Bridge Configuration>PEG Port Configuration>PEG Port - [Auto]
The system will then boot on the primary screen of the bottom connector of the graphics card that is clos-
est to the SBC, irrespective of the settings of the identification links on the Image4 graphics cards. In this
context “closest to the SBC” is defined in terms of the PCI bus enumeration, so if a Vision800X is attached
to the host, the system will boot on the first VGA card to be discovered in the Vision800X (counting from
the slot closest to the S-Link slot), and failing that the first graphics card in the host machine.
When the BIOS is set to PEG/PCI as above you are free to install the Image4 cards in any PCIe slot,
including the first (x8 lane) slot.
11