Vsn970 led’s – Datapath VSN970 User Manual
Page 14
VSN970 LED’s
The VSN970 and VSN900X have an LED for each PCIe slot and the PICMG1.3 SBC slot.
14
Fig.10
The LED’s indicate the following:
LED1
ON = +5V Standby Voltage present
LED2
ON = +5V supply present
LED3
ON = +12V supply present
LED4
ON = +3.3V supply present
LED5
ON = PICMG link speed = G3, FLASH-FAST = G2, FLASH-SLOW = G1
LED7
ON = PCIe Slot 1 link speed = G3, FLASH-FAST = G2, FLASH-SLOW = G1
LED9
ON = PCIe Slot 2 link speed = G3, FLASH-FAST = G2, FLASH-SLOW = G1
LED10
ON = PCIe Slot 3 link speed = G3, FLASH-FAST = G2, FLASH-SLOW = G1
LED11
ON = PCIe Slot 4 link speed = G3, FLASH-FAST = G2, FLASH-SLOW = G1
LED12
ON = PCIe Slot 5 link speed = G3, FLASH-FAST = G2, FLASH-SLOW = G1
LED13
ON = PCIe Slot 6 link speed = G3, FLASH-FAST = G2, FLASH-SLOW = G1
LED14
ON = PCIe Slot 7 link speed = G3, FLASH-FAST = G2, FLASH-SLOW = G1
LED15
ON = PCIe Slot 8 link speed = G3, FLASH-FAST = G2, FLASH-SLOW = G1
LED16
Not Used
No LED’s flashing indicates that lane width has not been established. The LED’s will not flash on slots
where no cards are installed.