Datapath VSN1170 - Manual (Page 5)

Unpacking
Your packing box should contain the following items:
• The VSN1170 Chassis (Large systems may also include the VSN1100X expansion chassis)
• Express11-G3 backplane (installed)
• SBC4 (installed) (VSN1170 only)
• Mouse (VSN1170 only)
• Keyboard (VSN1170 only)
• Cables and Adapters (See Quantity guide Fig. 1)
• Software Installation Suite CD (VSN1170 only.)
This CD contains all of the software required for the VSN1170, including
• the drivers for the capture cards and the Wall Control application software.
• SBC documentation (VSN1170 only)
If there are any discrepancies, you should contact Datapath immediately.
5
Approved Cables and Adapters - Quantity Guide
Fig.1
C1 x2 per VisionRGB-E2S card. x1 per VisionRGB-E1S and VisionSD4+1 card
C2 x1 per VisionRGB-E1S/E2S card. x1 per VisionSD4+1 card
C3 x1 per VisionRGB-E1S/E2S card. x1 per VisionSD4+1 card
C4 x2 per VisionHD4 card
C5 x 1 per SBC4
C6 x1 per VisionSD8 and x1 per VisionSD4+1 card
C7 x2 for the RPSU
If your system is populated with Datapath PCI Express plugin cards the following cables and adapters are
supplied as per the quantity guide below.