Datapath VSN990 - Manual (Page 5)

Unpacking
Your packing box should contain the following items:
• The VSN990 Chassis (Large systems may also include the VSN900X expansion chassis)
• Express9-G3 backplane (installed)
• SBC3 (installed) (VSN990 only)
• Mouse (VSN990 only)
• Keyboard (VSN990 only)
• Cables and Adapters (See Quantity guide Fig. 1)
• Software Installation Suite CD (VSN990 only.)
This CD contains all of the software required for the VSN990,
includingthe drivers for the capture cards and the Wall Control application software.
• SBC documentation (VSN990 only)
If there are any discrepancies, you should contact Datapath immediately.
5
Cables and Adapters - Quantity Guide
Fig.1
C1 x 1 - optional. If requested this item may be installed inside the VSN990
C2 x2 per VisionRGB-E2S card. x1 per VisionRGB-E1S and VisionSD4+1 card
C3 x1 per VisionRGB-E1S/E2S card. x1 per VisionSD4+1 card
C4 x1 per VisionRGB-E1S/E2S card. x1 per VisionSD4+1 card
C5 x 1 per SBC3
C6 x4 per ImageDP4 graphics card
C7 x1 per VisionSD8 and x1 per VisionSD4+1 card
C8 x2 for the RPSU