Dataman 770 Series - Manual (Page 13)

Development kit for DATAMAN 770 series
Programmer’s Guide
int __declspec(dllimport) __stdcall GetDeviceID();
Parameters: -
Return value:
Device code is calculated as 771+return value.
3.1.4. GetDeviceSerialNumber
Returns device serial number.
unsigned int __declspec(dllimport) __stdcall GetDeviceSerialNumber();
Parameters: -
Return value:
Device serial number.
3.1.5. GetDKVersion
Returns the version of the selected DK part.
void __declspec(dllimport) __stdcall GetDKVersion(int module, TDKVersion
*ver);
Parameters:
module – identifies DK part, which version is to be obtained
VERSION_EM770 – em770 driver
VERSION_DK – DK (m770drvdk.dll)
version – structure, which will be filled with the version
Return value: -
3.1.6. GetTimeBaseList
Returns the list of available timebases.
void __declspec(dllimport) __stdcall GetTimeBaseList(TTimeBaseItem
*TimeBaseList, int *TimeBaseListLength);
Parameters:
timebaselist – the first item of the array which will be filled with the available
timebases. Array must be at least 31 items long.
timebaselistlength – the number of array items which was filled (number of available
timebases)
Return value: -
Remark:
- 13 -