Dataman 570 Series - Manual (Page 6)

Development kit for DATAMAN 570 series
Programmer’s Guide
1. Basic information
1.1. Development kit contents
All development kit (DK) parts are located in the installation directory.
Directory Contents
Examples\C#.NET C#.NET example
Examples\VB.NET Visual Basic .NET example
Examples\VB Visual Basic 6.0 example
Examples\Delphi Delphi example
Examples\CBuilder C++ Builder example
Examples\VC Visual C++ example
Include\C#.NET C#.NET header files
Include\VB.NET Visual Basic .NET header files
Include\VB Visual Basic 6.0 header files
Include\Delphi Delphi header files
Include\CBuilder C++ Builder header files
Include\VC Visual C++ 6.0 header files
Bin m570drvdk.dll and m570drv.dll libraries
Table 1.1. –Development kit (DK) contents
1.2. DK usage
In order to make the DK work properly, it is necessary to have the DATAMAN 570
oscilloscope drivers installed. The m570drv.cs header file contains the cm570drv
class, which encapsulates all DK functions and constants. Add this file to project to
gain access to the cm570drv class. The m570drvdk.dll and m570drv.dll must be
present in the same directory as .exe file (bin\debug) during debugging.
1.3. Application deployment
The m570drvdk.dll and m570drv.dll libraries must be distributed together with your
application. The drivers for the DATAMAN 570 oscilloscope must be installed in the
system in order to communicate with the device. The application will work with every
device with an activated DK.
- 6 -