Dataman 570 Series - Manual (Page 16)

Development kit for DATAMAN 570 series
Programmer’s Guide
Remark:
If it is necessary to keep the 0V position on the screen intact, it is necessary to set the
vertical shift using function SetVert to the return value.
3.3.3. SetCoupling
Sets selected coupling on the channel.
public static extern void SetCoupling(int channel, int coupling);
Parameters:
channel – determines channel
CHANNEL_A – channel A
CHANNEL_B – channel B
coupling – determines coupling
COUPLING_AC – AC coupling
COUPLING_DC – DC coupling
Return value: -
3.3.4. SetVert
Sets specified shift to the selected channel.
public static extern int SetVert(int channel, int shift);
Parameters:
channel – determines channel
CHANNEL_A – channel A
CHANNEL_B – channel B
shift – shift value from 0 to 4095, where 0 moves the waveform maximally
downwards and 4095 moves the waveform maximally upwards
Return value:
Position on the screen (quantization level), which corresponds with 0V.
3.3.5. SetTriggerLevel
Sets threshold on the selected source.
public static extern void SetTriggerLevel(int channel,int level);
Parameters:
channel – determines channel
CHANNEL_A – channel A
CHANNEL_B – channel B
level – determines quantization level (0 to 255), which will be considered as
threshold
Return value: -
- 16 -