Dataman 520 Series - Manual (Page 28)

Development kit for DATAMAN 520 series
Programmer’s Guide
CHANNEL_B 200
CHANNEL_C 300
CHANNEL_D 400
Data acquistion control constants
CODE_RESET_MEASURING 40
CODE_START_MEASURING 41
CODE_STOP_MEASURING 42
Device driver return values
DEVICE_FUNCTION_SUCCEEDED 1
DEVICE_TIME_MODE_NORMAL 2
DEVICE_TIME_MODE_SAMPLING 3
Trigger system status indicators
TRIGGER_STATUS_READY 1
TRIGGER_STATUS_NOT_READY 2
TRIGGER_STATUS_NOT_TRIGGER 3
Sampling mode data acquistion status indicators
TRIGGER_SAMPLING_STATUS_LESS_THAN_HALF 1
TRIGGER_SAMPLING_STATUS_MORE_THAN_HALF 2
TRIGGER_SAMPLING_STATUS_MORE_THAN_ENOUGH 3
Trigger system level selectors
TRIGGER_LEVEL_PRIMARY 1
TRIGGER_LEVEL_SECONDARY 2
Trigger source selectors
TRIGGER_CHANNEL_A 1
TRIGGER_CHANNEL_B 2
TRIGGER_EXTERNAL 4
Trigger mode selectors
TRIGGER_MODE_AUTO 1
TRIGGER_MODE_NORMAL 2
TRIGGER_MODE_MANUAL 4
Probe attenuation selectors
PROBE_TYPE_1 1
PROBE_TYPE_10 2
PROBE_TYPE_100 3
DK interface error codes
ERROR_OK 1000
ERROR_USB_FAILED 1001
ERROR_USB_DRIVER_NOT_LOADED 1002
ERROR_DEVICE_CONFIGURATION_FAILED 1003
ERROR_DEVICE_CALIBRATION_BROKEN 1004
ERROR_DEVICE_DRIVER_NO_ENTRY_POINT 1005
- 28 -