d&b Z5408 Horizontal bracket 8S - Manual (Page 4)

1.1. Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Qty. d&b Code Description
1
Z5408 d&b Horizontal bracket 8S [1]
Including:
2 Hex head bolt M8 x 25 [2]
2 Spring washer [3]
2 U washer [4]
2 Rubber washer [5]
1 D2959 Mounting instructions
1.2. Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case you have any doubt as to the proper
functioning and safety of the items, do not use them.
Load safety information
The maximum permitted working load of the Z5408 Horizontal
bracket 8S is 7.4 kg (16 lb) (according to BGV C1) which
corresponds to the weight of one 8S loudspeaker.
1.3. Intended use
The d&b Z5408 Horizontal bracket 8S must only be used in
conjunction with d&b 8S loudspeakers as described in these
mounting instructions.
The bracket can be:
– directly mounted to walls.
– directly mounted to ceilings or other suitable surfaces.
– horizontally flown and mounted to bars and truss with a tube
diameter of up to 70 mm (2.75") using the Z5010 TV spigot
and the Z5012 Pipe clamp.
Note: Refer to the specific mounting instructions for assembly
and operation of these accessories.
Fig. 1: Scope of supply
Fig. 2: Z5408 Rigging examples
1. Z5408 Horizontal bracket 8S
d&b Z5408 Horizontal bracket 8S, Mounting instructions (1.2 EN) 4