d&b Z5397 YP Swivel bracket - Manual (Page 5)

1.3. Intended use
The d&b Z5397 YP Swivel bracket must only be used in
conjunction with d&b YP cabinets (Y7P or Y10P) as described in
these mounting instructions.
Using the Z5024 Loudspeaker stand adapter, YP cabinets can be
mounted onto a loudspeaker stand with a tube diameter of 35 mm
(1.4").
Using the Z5010 TV spigot with fixing plate in conjunction with the
Z5012 Pipe clamp, YP cabinets can be vertically flown from
overhead bars or trusses with a tube diameter between 40 mm
and 70 mm (1.5" and 2.75").
The horizontal aiming as well as the vertical aiming can be set
continuously.
1.4. Assembly
Note: To ensure the cabinet to be exactly vertically aligned
within the bracket the d&b logo should always at the bottom
left whether the cabinet will be mounted on a high stand or
flown from bars or trusses.
1. Insert the hooks of the bracket's adapter plate into the
corresponding slots of the cabinet's quick lock adapter plate.
2. Push the adapter plate towards the back of the cabinet until it
is fixed in place.
3. Insert the securing pin [S] into the corresponding socket.
Þ Ensure the securing pin is properly inserted and locked.
d&b Z5397 Mounting instructions 1.2 en 5