d&b Z5353 E12 Horizonal bracket - Manual (Page 3)

Z5353 E12 Horizontal bracket
Fig. 1: E12 Horizontal bracket
1. Product description and scope of supply
The Z5353 E12 Horizontal bracket enables E12/E12-D loudspeaker
cabinets to be mounted and set to different horizontal or vertical angles.
Scope of supply
Please verify the shipment for completeness and condition of the items.
Qty. d&b Code Description
1 Z5353 E12 Horizontal bracket [1]
4 Hex head bolt M10 x 25 [2]
4 Spring washer [3]
4 U washer [4]
1 D2977.INT Mounting instructions
Weight and dimensions
Weight................................................................................................................4 kg (8.8 lb)
115 [4.5"] 115 [4.5"]
9 [0.35"] 9 [0.35"]
27
5 [1
0.
8"]
600 [23.6"]
92
[3
.2
"]
Fig. 2: Dimensions in mm [inch]
2. Intended use
The Z5353 E12 Horizontal bracket must only be used in conjunction
with the d&b E-Series loudspeakers E12/E12-D as described in these
mounting instructions.
Installation and set up should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure that
the suspension/fixing points are suitable for the intended use.
The horizontal bracket can be:
– directly mounted to walls or ceilings.
– horizontally flown and mounted to bars and trusses with a tube
diameter of up to 50 mm (2") using the Z5010 TV spigot with
fixing plate and the Z5012 Pipe clamp.
Z5353 Mounting instructions (1.0 EN) Page 3 of 6