d&b Z5056 M4 Flying bracket - Manual (Page 3)

Z5056 M4 Flying bracket
1. Safety
The Z5056 M4 Flying bracket must only be used in conjunction with the
d&b M4 stage monitor as described in this mounting instructions.
Installation should only be carried out by fully trained personel. There
are certain rules for installation that must be complied with.
It is the responsibility of the person installing the assembly to ensure that
the structure being attached to is suitable for the intended use.
The flying bracket must be inspected for faults before use. Please pay
attention to section 9. Maintenance and care on page 5.
In the case of a malfunction or in any doubt of proper function and
safety the bracket must be withdrawn from use immediately.
Secondary safeties must always be provided and used when flying or
fixing loudspeaker loads overhead.
2. Load safety information
WARNING! The maximum permitted load of the Z5056 M4 Flying
bracket is 20 kg/44 lb
The M4 Flying bracket must only ever be used with the
outer frame [A] vertically aligned whether suspended or
placed on top of a loudspeaker stand.
[2]
[1]
Fig. 1: Z5056 M4 Flying bracket Part list
3. Scope of supply
1 x Z5056 M4 Flying bracket [1] including:
2 x Handbolts M10x20 [2]
and this Mounting instructions.
Please verify the shipment for completeness. Please carry out a visual
inspection of the packaging and obvious damage during shipment.
If there is any sign of damage or incompleteness to the items listed in
above please contact your local dealer from whom you received the
Flying bracket.
4. Weight / Dimensions
Weight..............................................................................................................5.5 kg (12 lb)
406 [16"] [16"] 406 406
255
[1
0"]
[1
0"]
255255
694
[27.3
"]
560 [22"] [22"] 560 560
115 [4.5"] 115 115
M10 M10
M8
M10
M8
Fig. 2: Z5056 M4 Flying bracket dimensions in mm [inch]
Z5056 Mounting instructions (1.1 EN) Page 3 of 6