d&b D80 Touring rack NEMA L21-30 - Manual (Page 11)

CAN-Bus network
CAN
Represents the CAN input of the first amplifier
while the other two amplifiers are linked
within the rack.
CAN LINK Represents the CAN output of the last (third)
amplifier.
TERMINATE/
LINK
The built-in termination switch allows two
settings:
1.
LINK: In system racks, at the start of and
within a CAN-Bus segment, set the switch
to LINK.
2. TERMINATE: On the last system rack of
a CAN-Bus segment, set the switch to
TERMINATE
Note: A detailed description of remote control via the d&b
Remote network (CAN-Bus) is given in the technical
information TI 312 (d&b code D5312.EN) which can be
downloaded from the d&b website at www.dbaudio.com .
d&b Z5330.050 Manual 1.1 en 11