d&b MAX2 - Manual (Page 8)

2.5. Technical specifications
MAX2 system data
Frequency response (–5 dB standard) 55 Hz - 20 kHz
Frequency response (–5 dB CUT mode) 90 Hz - 20 kHz
Max. sound pressure (1 m, free field)
MAX2 with D80/D20/D12
135 dB
MAX2 with D6 131 dB
(SPLmax peak, pink noise test signal with crest factor of 4)
Input level (100 dB
SPL
/1 m) –17 dBu
MAX2 loudspeaker
Nominal impedance 8 ohms
Power handling capacity (RMS/peak 10 ms) 250/1600 W
Nominal dispersion angle (conical) 75°
Components 15" LF driver with ferrite magnet
1.4" exit compression driver
Passive crossover network
Connections NLT4 F/M
optional 2 x NL4 or EP5
Pin assignment NLT4 F/M and NL4: 1+/1–
EP5: 1: + / 2: –
Weight 23 kg (50 lb)
MAX2 cabinet dimensions in mm [inch]
MAX2 frequency response (MAX2 setup, floor coupling, standard)
MAX2 frequency response (linear setup, free field), standard and
CUT
d&b MAX2 Manual 1.1 en 8