DeVillbiss Air Power Company D21684 - Manual (Page 8)

8 — ENG
ASSEMBLY
2. Connect wand to gun. Tighten securely.
Dual Lance
Multi-Reg
3. Attach high pressure hose to gun. The point of attachment for the high pressure hose will differ depending on
the model purchased. Tighten securely.
Illustration A
Illustration B
4. Connect chemical hose to the pump by one of
the following methods:
a. Press the chemical hose onto the barb fitting
located near the high pressure hose connection-
see illustration A.
OR
b. Place chemical hose with fitting into chemical
injector (black elbow)-see illustration B.
OR
Hi-Low/Quick Connect
OR