d&b 10S - Manual (Page 11)

2.5. Technical specifications
10S/10S-D system data
Frequency response (–5 dB standard) 60 Hz - 18 kHz
Frequency response (–5 dB CUT mode) 100 Hz - 18 kHz
Max. sound pressure (1 m, free field)
10S with D6/D12
127 dB/130 dB
10S-D with D6/D12 127 dB/130 dB
(SPLmax peak, pink noise test signal with crest factor of 4)
Input level (100 dB-SPL/1 m) –12 dBu
10S/10S-D loudspeaker
Nominal impedance 12 ohms
Power handling capacity (RMS/peak 10 ms) 200/1200 W
Nominal dispersion angle (hor. x vert.) 10S 75° x 50°
Nominal dispersion angle (hor. x vert.) 10S-D 110° x 55°
Components 10“ driver with neodymium magnet
1.4” exit compression driver on rotatable waveguide
Passive crossover network
Connections 2 x NL4
1 x screw terminal (ST - up to 4 mm 2 /AWG 11)
Optional fixed cable (PG):
H07-RN-F, 2 x 2.5 mm 2 (AWG 13), 5.5 m (18 ft)
Pin assignment NL4: 1+/1–
Fixed cable (PG): brown + / blue –
Weight 13 kg (29 lb)
Fig. 17: 10S frequency response, standard and CUT modes
Fig. 18: 10S-D frequency response, standard and CUT modes
Fig. 19: 10S/10S-D cabinet dimensions in mm [inch]
d&b 10S/10S-D Manual (1.1 EN) 11