Input video and sync signal, Video, Sync – CUE monitorCUE User Manual
Page 7
User Manual monitorCUE
www.cuesystem.com
Page 7 of 20
3.2. Input Video and Sync Signal
3.2.1. Video
Input
• Type: Analog RGB
• Level: 0.7 Vp-p ±5%
• Polarity: Positive bright
• Impedance:
75
Ω ±10% (terminated)
Resolution: optimum 1024 x 768 @ 60 Hz, maximum 1024 x 768 @ 75 Hz
Horizontal frequency: 30 - 61 kHz (normal mode)
Vertical frequency: 55 - 76 Hz (normal mode)
Applicable bandwidth: typical 65 MHz (1024 x 768 @ 60 Hz)
Sync signal
• Type: separate H/V sync
• Level: TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V)
• Polarity: positive or negative
• Termination resistance: more than 2 kΩ
3.2.2. Sync
Input
• Type: separate H/V sync
• Level: TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V)
• Polarity: positive or negative