Connecting, General – CUE monitorCUE User Manual
Page 6
User Manual monitorCUE
www.cuesystem.com
Page 6 of 20
3. Connecting
3.1. General
The monitorCUE uses the Connector Module for connection of all inputs and outputs. The Connector
Module is connected to the tabletop part via one cable.
On the Connector Module there are following connectors
• VGA Input allows a connection of a standard VGA output using VGA cable (delivered).
• RS-232 Touch is an output of touch sensor. Connection can be made by a data cable RS-232
(delivered).
• The connector labeled 24 VDC allows a connection of the standard power supply
CUEadapter /50W (delivered).
• monitorCUE is a connector dedicated for a connection of the tabletop part.
monitorCUE
Connector Module
monitorCUE
Input
VGA
Touch
24 VDC
RS–232
Power supply
90 - 264 VAC
CUEadapter /50W
1 2
monitorCUE
monitorCUE
Connector Module
PC or touchCUE-V /i
VGA cable
Serial data cable
VGA output
COM x
Cable DB-15 / DB-15