Dual XD6150 - Manual (Page 11)

11
Problem Cause Action
Unit will not turn
on
(no power)
Yellow wire not connected or incorrect
voltage. Red wire not connected or
incorrect voltage
Check connections for proper
voltage (11~16VDC)
Black wire not connected Check connection to ground
Fuse blown Replace fuse
Unit has power
(but no sound)
Speaker wires not connected Check connections at speakers
One or more speaker wires touching
each other or touching chassis ground Insulate all bare speaker wires
from each other and chassis ground
Unit blows fuses
Yellow or red wire touching chassis
ground
Check for pinched wire
Speaker wires touching chassis ground Check for pinched wire
Incorrect fuse rating
Use fuse with correct rating
Excessive skipping
Unit is not mounted correctly or
backstrap is not secure Check mounting sleeve and
backstrap support
Physical defect in media (CD, CD-R or
CD-RW)
Check media for scratches
ERROR-01 appears
on display
Disc read error Press EJECT or RESET
ERROR-02 appears
on display
Focus error or disc is in upside down Press EJECT or RESET
Unit will not accept
a disc
CD mechanism position out of
alignment
Press and hold EJECT for 3
seconds to reset CD mechanism
position
CD transit screws still in place
Remove 2 transit screws located on
top of the unit
XD6150 OPERATION
Troubleshooting - General