COMMELL LV-667 - Manual (Page 29)

LV-667 User’s Manual Hardware Setup
USB2.0 & IEEE1394 Interface 29
Connector: CN_1394
Type: 8-pin header (pitch = 2.00mm)
Pin Description Pin Description
1 CPWR 2 GND
3 TPB2- 4 TPB2+
5 TPA2- 6 TPA2+
7 GND 8 GND
Connector: CN_USB
Type: 10-pin (5 x 2) header for USB5/6 Ports
Pin Description Pin Description
1 VCC 2 VCC
3 Data0- 4 Data1-
5 Data0+ 6 Data1+
7 Ground 8 Ground
9 Ground 10 N/C
PS: The USB2.0 will be only active when you connecting with the USB2.0 devices, if you
insert an USB1.1 device, the port will be changed to USB1.1 protocol automatically. The
transferring rate of USB2.0 as 480Mbps is depending on device capacity, exact transferring
rate may not be up to 480Mbps.