COMMELL LV-667 - Manual (Page 21)

LV-667 User’s Manual Hardware Setup
LAN Interface 21
2.9
The board provides two 10/100Mbps LAN interfaces with VIA VT6103 PHY and REALTEK
8100B PCI controller, and compliant with standard IEEE 802.3 Ethernet interface for
100BASE-TX. The jumper of JLAN can let you enable/disable LAN2 with REALTEK 8100B.
The CN_WOL is the interface for your PCI LAN card to wake the system up.
Jumper: JLAN
Type: Onboard 3-pin jumper
JLAN Mode
1-2 Enable
2-3 Disable
Default setting
Connector: CN_WOL
Type: onboard 3-pin (1 x 3) wafer connector
Pin 1 2 3
Description +5V Standby Ground WOL-Ctrl
JLAN
1
3
1
3
CN_WOL