Dixon 7000 Series - Manual (Page 31)

Page 31
CARE AND MAINTENANCE
LEVELING THE DECK
A. Set the tire pressure on all four tires.
B. Move the tractor to a hard, level surface (i.e. concrete or blacktop). Place a 2x4
board under all four corners of the deck shell, just inside of the anti-scalping
wheels. Lower the deck down onto the boards. The deck must rest on the
boards, not the anti-scalping sheels. Adjust the deck hangers longer or shorter
until the deck "just" comes off of the boards. Remove the boards and verify that
the deck is hanging on all four deck hangers, re-adjust if necessary. Lock the
jam nuts on the deck hangers. (Note: the two rear deck hangers will be easier to
adjust in the fender skirts are removed).
2 x 4 board, one each corner, just inside
of anti-scalping wheel
Front Deck Hanger
(one each side)
Rear Deck Hanger
(one each side)