COMMELL LV-670LVDS - Manual (Page 15)

LV-670 series User’s Manual 15
2.2 CPU and DRAM Setting
The board is based on Intel Socket 478 architecture with Intel 845G
chipset, supports Intel Socket 478 Pentium 4 / Celeron CPU at 533/400
MHz FSB.
System memory of this board supports up to 1GBytes DDR200/266/333
SDRAM on two 184-pin DIMM sockets. Please notices that Intel 845G
GMCH DOESN’T support ECC and register DIMM.
2.3 CMOS Setting
The board’s data of CMOS can be setting in BIOS. If the board refuses to
boot due to inappropriate CMOS settings, here is how to proceed to clear
(reset) the CMOS to its default values.
Jumper: JRTC
Type: onboard 3-pin header
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting
JRTC
1