COMMELL FS-977 - Manual (Page 6)

1.2 Specification
General Specification
Form Factor Full-size PICMG-bus CPU Card / Slot PC
PICMG version 1.0 (Rev. 2.0), PCI version 2.0 compliant
CPU Intel mPGA478 Pentium 4, Celeron @ 533/400 MHz FSB
Support Intel Hyper-Threading Technology
Support Northwood / Willamette Pentium 4 / Celeron CPU
Memory 2 GBytes DDR200/266/333 SDRAM on 2 x 184-pin DIMM
sockets. (No ECC/register DIMM support)
Chipset Intel 82845GV GMCH and 82801DB ICH4
BIOS Phoenix-Award 2Mb PnP flash BIOS
Green Function Power saving mode supported in BIOS with DOZE, STANDBY
and SUSPEND modes. ACPI version 1.0 and APM version 1.2
compliant
Watchdog Timer Generates NMI or system reset watchdog timer with 1 to 255
sec. / min. of time out value
Real Time Clock Intel ICH4 built-in RTC with lithium battery
Enhanced IDE PCI enhanced IDE interface supports dual ports up to 4 ATAPI
devices with UltraATA/100 supported
ISA High Drive ISA 64mA high Drive capacity with TI 245 buffer on address and
data bus
Multi-I/O Port
Chipset Intel 82801DB ICH4 and Winbond W83627HF-AW LPC
super-I/O controller
Serial Port
Two RS-232 serial ports. Both with 16C550 compatible UART
and 16 bytes FIFO
USB Port
Four USB 2.0 ports with 480 Mbps of data transfer rate
Parallel Port
One bi-direction parallel port with SPP/ECP/EPP mode
Floppy
One floppy port supports up to two FDD
IrDA Port
One IrDA compliant Infrared interface supports SIR
K/B & Mouse PS/2 keyboard and mouse ports, AT keyboard port
FS-977 User’s Manual 6