COMMELL FS-977 - Manual (Page 19)

2.8 Ethernet Interface
The board integrated with dual Intel PRO/100+ Fast Ethernet interfaces at the type of
10Base-T/100Base-TX auto-switching Fast Ethernet with full duplex and IEEE 802.3U
compliant. Both of them connect via RJ45 connectors on bracket. The LAN2 can enable
or disable by jumper JLAN.
The primary LAN interface is controlled by Intel ICH4 with Intel 82562ET and setting as
LAN1. It provides the same performance as Intel 82559 LAN with the same driver. The
secondary LAN interface is controlled by Intel 82559ER chipset and setting as LAN2.
Jumper: JLAN
Type: onboard 3-pin header
JLAN LAN2 Enable / Disable Setting
1-2 Enable
2-3 Disable
Default setting
JLAN
1 3
JWOL
1
2
3
Connector: JWOL
Type: onboard 3-pin header Wake-On-LAN connector
Pin 1 2 3
Description WOL-Ctrl Ground +5V Standby
FS-977 User’s Manual 19