COMMELL FE-97G - Manual (Page 10)

FE-97G User’s Manual
- 9 -
1.2
General Specification
Form Factor Full-size PICMG CPU Card
PICMG version 1.0 (Rev. 2.0), PCI version 2.0 compliant
CPU Intel® Atom N270 processor
Package type: FCBGA8
Front side bus: 533MHz
Memory 1 x 200-pin DDR2 SO-DIMM SDRAM up to 2GB
Unbufferred, none-ECC memory supported only
Chipset Intel® 945GSE and ICH7M
BIOS Phoenix-Award v6.00PG 8Mb SPI flash BIOS
Green
Function Power saving mode includes doze, standby and suspend modes.
ACPI version 2.0 and APM version 1.2 compliant
Watchdog
Timer System reset programmable watchdog timer with 1 ~ 255
sec./min. of timeout value
Real Time
Clock Chipset integrated RTC with onboard lithium battery
IDE UltraATA133 IDE interface supports up to 2 ATAPI devices
One 44-pin IDE port onboard
One CompactFlash Type II socket
Serial ATA Intel® ICH7M integrates 2 Serial ATA interfaces
(No RAID Function) Up to 150MB/s of transfer rate
Multi-I/O Port
Chipset Intel® ICH7M with Winbond® W83627DHG-P controller
Serial Port Five RS232 and one jumper selectable RS232/422/485
Parallel Port One internal bi-direction parallel port with SPP/ECP/EPP mode
Floppy Port One internal Floppy port
USB Port 6 x Hi-Speed USB 2.0 ports with 480Mbps of transfer rate
IrDA Port One IrDA compliant Infrared interface supports SIR
K/B & Mouse PS/2 keyboard and mouse port on bracket
GPIO One 12-pin Digital I/O connector with 8-bit programmable
VGA Display Interface
Chipset Intel® 945GSE GMCH (Graphic Memory Controller Hub)
Memory Up to 224MB shared with system memory
Display Type CRT, LCD monitor with analog display, DVI, HDTV
Connector External DB15 female connector
Onboard 40-Pin LVDS connector (FE-97GTXDG/TXDG2)
Onboard 26-Pin DVI connector (FE-97GTXDG/TXDG2)
Onboard 9-Pin TV-out connector