Care and maintenance, Electrical systems, Cleaning the mower – Dixon 4000 Series User Manual
Page 39: Mower deck plates, Serial numbers, Warranty, Parts/service
39
CARE AND MAINTENANCE
ELECTRICAL SYSTEMS:
Keep all connections clean and tight.
CLEANING THE MOWER:
Wash mower periodically. Clean above and below deck.
High pressure washing and alkaline based soaps can cause
damage to bearings and other parts of the mower. After
washing your mower, start the engine and engage the mower
deck for a few minutes to disperse any water that may have
accumulated in bearings, pulleys or fans.
Note: Allow mower to cool before
washing. If bearings are hot, they
will draw moisture inside as
they dry & cause corrosion.
MOWER DECK PLATES:
Check periodically. Replace bolted-on wear plates before shaft
wears into mower deck plates. See illustration.
SERIAL NUMBERS:
The serial number is located on frame at rear of engine.
WARRANTY:
See Warranty Registration Form(sample on page 12).
PARTS/SERVICE:
See your Dixon dealer for replacement parts, warranty or service.
PLEASE HELP PROTECT THE ENVIRONMENT BY AVOIDING ALL
CHEMCIALS WHICH MAY DAMAGE OR CAUSE HARM TO
PLANTS AND ANIMALS IN YOUR AREA.