Channel Master DVR+ (7500GB16) - Manual (Page 8)

4
Turn your TV on.
Point the remote at the TV.
Hold down both CH+ and VOL- on the remote
simultaneously for at least two seconds. The TV
button LED gives two slow flashes to indicate
successful entry into setup mode.
Press INPUT. The TV button LED comes on.
Press TV POWER repeatedly until the TV
switches off.
Press INPUT. The TV button LED gives two
slow flashes to indicate that the code has been
stored successfully.
Programming the Remote Control
The remote is capable of controlling basic functions of most TVs (volume, mute,
power, input). To program the remote control to operate your TV, you may use the
Easy Scan method or the Code Entry method.
Easy Scan
1
3
4
5
2