Casella CEL CEL-181 User Manual
Page 12
Casella USA
17 Old Nashua Road #15
Amherst, NH 03031-2839
www.casellausa.com
Page 12 of 14
tel:
(
800) 366-2966
27 Jan 2006
fax: (603) 672-8053
7 Manufacturer's Warranty and
Servicing
Arrangements
Each Noise Dose Meter has been carefully
inspected and calibrated prior to dispatch from
the factory in order to ensure its rigid conformity
to the requirements of the specification. All
technical information relating to individual
instruments are filed under the instrument's
serial number. It is important, therefore, to
always quote this number in any
correspondence with the manufacturers.
The manufacturers undertake to rectify any
defect in the instrument that is directly
attributable to faulty design or assembly, which
becomes apparent during the first twelve
months from the initial calibration. In order to
take advantage of this warranty the instrument
must be returned carriage paid to the
manufacturer's factory or accredited agent
where the necessary repairs will be carried out.
Many of the specialized components used in the
Noise Dose Meter are the subject of separate
guarantees by their actual manufacturers and in
all cases; the benefit of these undertakings will
be passed on to the user. However, Computer
Engineering's liability is limited to items of their
own manufacture and they do not accept liability
for any loss resulting from the operation or
interpretation of the results from this equipment.
In the event of a malfunction developing, the
instrument should be carefully packed and
returned to either the manufacturer's agent in
the territory or, in the case of domestic sales,
our Hitchin factory, along with a detailed
description of the fault. The necessary repairs
will be undertaken and the instrument returned
as soon as possible. Except on approved
accounts, service work is undertaken against
quotation and all packing and transit costs are
charged.