Casella CEL CEL-360 User Manual
Page 2
Switches
the
instrument
ON/OFF
Red
d
ot
CEL-425 Microphone
Adaptor
CEL-6681
Dosimeter
Microphone
& Cable
Changes
menu
(operating
mode)
Access
es
stored dat
a
Navigator keys select
activ
e options from
curren
t
menu
S
tops
a measurement
but
must
b
e
followed
immediately
b
y
Confirms
action
of
other
keys
S
tart
s/Pauses/
Rest
art
s a
measurement
rec
ord
FIELD
GUIDE
to
CEL-320/360
Noise
Dosimeters
/SLMs
01044
DA
T
A
MENU
DA
T
A
7. If Required
PLUS
Lock keys and display to
prevent unauthorised
tampering.
The keys and display cannot be locked
while the instrument is paused.
8. If Required
PLUS
Unlock keys and display to
restore normal operation.
9. Stop Run
Stop ?
This command must be confirmed.
10. Confirm
Stop
The run is now ended.
DO NOT disconnect the battery once
runs have been stored; they will be
lost.
11. Switch OFF
Blank Screen
No operations possible.
Recall Stored Dose Data
When a hard copy of stored dose data is required, BEFORE SWITCHING ON,
connect a Centronics printer via both C6671 PC Cable (supplied with the dosimeter)
and CEL-6672 Printer Cable.
1. While not
logging data
Enable Data Recall and see the Start
Date & Time for the most recently
stored run.
2. Review
Stored
Runs
several
times
Select Start Date & Time for required
run.
If a printer is connected and switched
ON, continuing to press
will
eventually offer a PRINT ALL option
that is enabled by pressing
.
3. Review
Stored
Data
Shows where data for the selected
run is stored (Store 3) and on a
CEL-360, indicates the number of
completed profile periods.
4. Review
Stored
Data
repeat
If a printer is connected and switched
ON, the next display shows PRINT
READY, if switched OFF, the display
shows PRINT OFF, otherwise the
Duration is displayed as in Step 6.
5. Print Hard
Copy
The display shows print messages while a data set from the selected
run is printed in standardised format for the measurement protocol
used.
6. Review
Stored data
Display steps through all details and
parameters recorded for the run,
starting with duration and completes a
cycle back to Date & Time display for
the run.
Some displays offer
and
options that show further parameters.
Operation as a Sound Level Meter
Using the red dot to aid pin location, connect a CEL-425 SLM Microphone
Adaptor, perform an acoustic calibration as described above, then proceed as follows.
1. Start from
final Start
Up display
The last used measurement mode will
be selected.
2. If Required
Change
Mode
sufficient
times
SLM measurement is now active with
the current A-weighted Fast level (L
AF
)
displayed.
SLM mode can be selected ONLY
while a microphone is fitted.
3. Review
SLM
Measure-
ments
several
times
The display steps to Linear Peak (L
Lpk
)
and then through all details and
parameters to Duration, before
completing the cycle back to the first
SLM display.
4. Change
Settings
When
and
are shown on the display, the relevant navigator
keys may be used to change the current settings.
5. Switch OFF
Blank Screen
No operations possible.
CEL-320/360 Dosimeters
060335 i1/Sept 01
CEL instrumentation and software is designed, manufactured and serviced by:
Casella CEL Limited,
Regent House, Wolseley Road, Kempston, Bedford, MK42 7JY, U.K
Phone: +44 (0) 1234 844 100 Fax: +44 (0) 1234 841 490 e-mail: [email protected]
Web: www.casella.co.uk
Casella CEL Inc,
Tech Park, 17 Old Nashua Road, Box 15, Amherst, NH 03031, U.S.A.
Office Phone: +1 603 672 0031 Toll Free: +1 800 366 2966 Fax: +1 603 672 8053
e-mail: [email protected].
DATA
DATA
DATA
DATA
DATA
DATA
DATA
A
DATA
DATA
MENU
dB
SLM
A
dB
SLM
7. If Required
PLUS
Lock keys and display to
prevent unauthorised
tampering.
The keys and display cannot be locked
while the instrument is paused.
8. If Required
PLUS
Unlock keys and display to
restore normal operation.
9. Stop Run
Stop ?
This command must be confirmed.
10 Confirm
Stop
The run is now ended.
DO NOT disconnect the battery once
runs have been stored; they will be
lost.
11. Switch OFF
Blank Screen
No operations possible.
Recall Stored Dose Data
When a hard copy of stored dose data is required, BEFORE SWITCHING ON,
connect a Centronics printer via both C6671 PC Cable (supplied with the dosimeter)
and CEL-6672 Printer Cable.
1. While not
logging data
Enable Data Recall and see the Start
Date & Time for the most recently
stored run.
2. Review
Stored
Runs
several
times
Select Start Date & Time for required
run.
If a printer is connected and switched
ON, continuing to press
will
eventually offer a PRINT ALL option
that is enabled by pressing
.
3. Review
Stored
Data
Shows where data for the selected
run is stored (Store 3) and on a
CEL-360, indicates the number of
completed profile periods.
4. Review
Stored
Data
repeat
If a printer is connected and switched
ON, the next display shows PRINT
READY, if switched OFF, the display
shows PRINT OFF, otherwise the
Duration is displayed as in Step 6.
5. Print Hard
Copy
The display shows print messages while a data set from the selected
run is printed in standardised format for the measurement protocol
used.
6. Review
Stored data
Display steps through all details and
parameters recorded for the run,
starting with duration and completes a
cycle back to Date & Time display for
the run.
Some displays offer
and
options that show further parameters.
Operation as a Sound Level Meter
Using the red dot to aid pin location, connect a CEL-425 SLM Microphone
Adaptor, perform an acoustic calibration as described above, then proceed as follows.
1. Start from
final Start
Up display
The last used measurement mode will
be selected.
2. If Required
Change
Mode
sufficient
times
SLM measurement is now active with
the current A-weighted Fast level (L
AF
)
displayed.
SLM mode can be selected ONLY
while a microphone is fitted.
3. Review
SLM
Measure-
ments
several
times
The display steps to Linear Peak (L
Lpk
)
and then through all details and
parameters to Duration, before
completing the cycle back to the first
SLM display.
4. Change
Settings
When
and
are shown on the display, the relevant navigator
keys may be used to change the current settings.
5. Switch OFF
Blank Screen
No operations possible.
CEL-320/360 Dosimeters
060335 i1/Sept 01
CEL instrumentation and software is designed, manufactured and serviced by:
Casella CEL Limited,
Regent House, Wolseley Road, Kempston, Bedford, MK42 7JY, U.K
Phone: +44 (0) 1234 844 100 Fax: +44 (0) 1234 841 490 e-mail: [email protected]
Web: www.casella.co.uk
Casella CEL Inc,
Tech Park, 17 Old Nashua Road, Box 15, Amherst, NH 03031, U.S.A.
Office Phone: +1 603 672 0031 Toll Free: +1 800 366 2966 Fax: +1 603 672 8053
e-mail: [email protected].
DATA
DATA
DATA
DATA
DATA
DATA
DATA
A
DATA
DATA
MENU
dB
SLM
A
dB
SLM
Switches
the
instrument
ON/OFF
Red dot
CEL-425
Microphone
Adaptor
CEL-6681 Dosimeter
Microphone
& Cable
Changes menu
(operating
mode)
Access
es
stored dat
a
Navigator keys select
activ
e options from
curren
t
menu
S
tops
a measurement
but
must
be
followed
immediately
b
y
Confirms ac
tion
of
other
keys
S
tart
s/Pauses/
Rest
art
s a
measurement
rec
ord
FIELD
GUIDE
to
CEL-320/
360
Noise
Dosimeters
/SLMs
01044
DA
T
A
MENU
DA
T
A
Think environment Think Casella
Think environment Think Casella